ACCESSORIES

Retrieval Tool Kits

RT-750

Constructed of 300 series stainless steel, the RT-750 is ¾” in diameter and performs numerous retrieval tasks in a variety of environments, including nuclear containment, marine and freshwater. Removable jaws permit quick swapping of plier, fork and tine, viper and sampling cup attachments

RT-1000

Constructed of 300 series stainless steel, the RT-1000 is 1” in diameter and is capable of performing the same tasks as the RT-750 but its jaws have a wider gasp and handles larger loads.

Accessories

Slip Ring Cable Reel

When you have more than 100 feet of cable, it’s time to think about cable management. The SLR4-500 is designed for over 500 feet of 1/4″ diameter cable and the SLR4-1000 can hold over 1,000 feet. Each system is built around one of the best cable reels in the industry. We have added a 4-conductor slip ring inside of the drum and wired it through the Red Dot Box on the access hub. Quality matters to us and to our customers.

.

Push Poles

Lights Camera Action, LLC builds for quality and performance. A pole that does not fit snuggly creates its own problems. We tried them and did not like them… so we decided to build our own poles. To begin we made the male insert 1 full inch in length. We tapered not only the edge of the male insert but we also tapered the inside of the female receptor. This allows the retractable spring loaded push pin to slide into place and lock by simply mating the two pieces together by hand.

3M Scotchcast

7.6 oz. Electrical Insulating Resin is a special flame retardant, two-part, polyurethane resin that is designed to replace the cable jacket when splicing or repairing cables

3M Temflex

Rubber Splicing Tape, 3/4″ x 22′, is a conformable self-fusing rubber electrical insulating tape.

Stainless steel pole system components

Pole System Coupler – CPL-10: 10″ Coupler for 1.25″ Sch. 10 pipe. Complete with two 1/16″ SS lanyards each with 3/8″ x 2″ SS Ball-Lok quick release pins.
Pole Assembly – PA-1.25-05:1.25″ Sch. 10 x 5′ pole with wire-way cutouts; 10″ Coupler (1.5″ Sch. 10) couples 1.25″ Sch. 10 pipe. Coupler comes complete with two 1/16″ SS lanyards each with 3/8″ x 2″ SS Ball-Lok quick release pins.
Lift Bail Standard Head – LBSHA-01: Multi-Hanger assembly incorporates T-Bar, Rail Hook and Lift Bail attached to a P-1.25-05 pole with 3/8″ x 2″ SS Ball-lock quick release pin.
Lift Bail Multi Head – LBMHA-01: Multi-Hanger assembly incorporates T-Bar, Rail Hook and Lift Bail attached to a P-1.25-05 pole with 3/8″ x 2″ SS Ball-lock quick release pin.

Blu-Vue Window Removal Tool

Designed to remove the front window retaining ring on the Blu-Vue Camera.

Teledyne Impulse Wet Pluggable Connectors

Lights Camera Action, LLC provides Impulse connectors on its camera and lighting equipment. Since all of our equipment is designed for underwater use we use the “Wet Pluggable” series of Impulse connectors.
If you need connectors for one of your projects, let us know. We will be happy to provide you with bulkhead connectors, locking sleeves, pigtails or any of the other Impulse series of connectors. For more information contact us.