SYSTEMS

Overview

Sometimes, your best solution isn’t a fixed view, but a camera that can visually sweep an area. That’s where pan and tilt comes in. Our smart pan and tilt mounts are radiation tolerant, are waterproof up to 50 meters, and are designed to work beautifully with both the RH-400 and the RT-200.

SPT-550

The SPT-550 series smart pan and tilt is a rugged radiation-tolerant unit designed primarily for use with the multiplexed RH-400 and RT-200 series of cameras, though it may be used with other CCTV cameras. The SPT-550 series smart pan and tilt is waterproof at depths up to 50 meters.When used with the RH-400, the SPT-550 contains a demultiplexer and drive board to enable it to be operated from the pulses encoded onto the video signal, limiting the need for extra conductors. Alternatively, when used with the RT-200 series cameras, the control signals are decoded within the camera, so that only a drive board is needed to operate the unit.

Features

  • Multiplexed Design
    • Acts as a Communication Link between CCU, Camera and Lights
    • Compatible with RH-400 Monochrome High Radiation Chalnicon Tube Camera
    • Compatible with RT-200 Radiation Tolerant Color 36:1 Zoom Camera
  • Adaptors available for various cameras
  • Radiation Tolerant >108 Rad Total Dose
  • Load capacity of 5Kg (11 lbs)
  • Sealed to IP68 (50 meters)

SPT-700

The SPT-700 series smart pan and tilt is a rugged radiation-tolerant unit designed primarily for use with the multiplexed RH-400 and RT-200 series of cameras, though it may be used with other CCTV cameras.
When used with the RH-400, the SPT-700 contains a demultiplexer and drive board to enable it to be operated from the pulses encoded onto the video signal, limiting the need for extra conductors. Alter- natively, when used with the RT-200 series cameras, the control signals are decoded within the camera so that only a drive board is needed to operate the unit.The drive motors are rugged, high-quality 24VDC motors employing rare-earth magnets and are coupled via planetary gear heads to the final output gears which result in very

Features

  • Multiplexed Design
    • Acts as a Communication Link between CCU, Camera and Lights
    • Compatible with RH-400 Monochrome High Radiation Chalnicon Tube Camera
    • Compatible with RT-200 Radiation Tolerant Color 36:1 Zoom Camera
  • Adaptors available for various cameras
  • Radiation Tolerant >108 Rad Total Dose
  • Load capacity of 15Kg (33 lbs)
  • Sealed to IP68 (50 meters)

 

low backlash and prevents back-driving.The output shafts of the unit are supported on double row ball bearings for strength and stability, allowing the unit to carry evenly distributed loads of up to 33 lbs. (15Kg).The speed of both axis, pan and tilt, are approximately 7.5 degrees per second. The input connector is carried on the mounting base of the unit and the connections to the camera and lighting assembly are carried on the upper platform, minimizing external cables.The SPT-700 is available in black anodized aluminum or stainless steel. Adjustable stops are available and are accessible inside the unit. The standard mounting base allows for both tapped and clearance slots. Custom mounting bases can be designed to customer requirements.

LA767 – Underwater LED Light

If you’re looking for a light for your underwater camera, the LA767 is a great choice.

While very small, the LA767 is very efficient, dissipating approximately 15 watts for a light output of approximately 4500 candelas at a beam width of 15°. The light itself contains no infra-red, so the beam does not cause any heating, which can be important in certain inspection processes.The unit can be produced in three beam widths: 15° standard, 25° flood, or 5° spot.  Each beam width has corresponding changes in usable distance.
The LA767’s constant-current power supply is incorporated into the control unit of the camera, giving the user a smooth control of the light output. The LA767’s lamp can be dimmed without a change of color temperature, making it is ideal for use with high-quality color cameras. In fact, our clients often pair the the LA767 with our RT-200, RH-300 and RH-400 cameras.

Stats

✦ Light Output: Approx. 4500 Candelas at 15º

✦ Color Temperature: 5,000ºK

✦ Radiation Tolerance: >107 Rad

✦ Connector: 4 pin Fischer connector

✦ Dimensions:2.99” Ø x 1.97” deep (76mm Ø x 50mm deep) excluding rear connector

✦ Weight: approx. 10.58 oz. (300g)